1. Lay out your towel and on the bottom of one side, measure and pin down your embellishments. I used 2 rows of satin ribbon and ball fringe. (Which can't be dried in the dryer, so take that into consideration for the person you're making it for.) I made the rows slightly longer in case my measurements were wrong. I didn't want to run out before it got to the edge.
 2. Using a zig-zag stitch, sew the ribbon on making sure you are getting both the ribbon and the towel. I didn't want the ribbon to flap up a bit, which is why I choose a zig-zag stitch opposed to just a straight stitch. For the ball fringe, I used a straight stitch going down each side to make sure it would stay on well.

3. Trim any excess embellishments off and either sew along those sides, burn them with a lighter, or use clear nail polish to prevent fraying.

4. And you're done! I only did one side of each towel, but you can do both sides if you would like.

Past examples of my family cards can be found here and here.

So, onto the giveaway! This giveaway is for 1 digital file (or 2 if you want it front and back) for a custom Christmas card design. You'll need to print them yourself at your local print lab or use my favorite printing service, Overnight Prints. They always have sales on this time of year, so they're very reasonable for high quality professional service.

Good luck! And I can't wait to work with you!

a Rafflecopter giveaway